Tinna

HIGH CARBON STEEL GRIT.

Our Products

Cast Steel Grit is produced by crushing of specific sizes of steel shot. Two out of three product range is heat treated. It is utilized for blast cleaning as well as surface preparation job by the industry.

 

GP STEEL GRIT

Quenched & tempered product, used in wheel blast machine for the faster cleaning of product. Product has same hardness of Steel Shot which is 46~51 HRC. Initially shape is angular & during operation shape changes to round. Suitable for Desanding / descaling applications.

GP STEEL GRIT

Quenched & tempered product, used in wheel blast machine for the faster cleaning of product. Product has same hardness of Steel Shot which is 46~51 HRC. Initially shape is angular & during operation shape changes to round. Suitable for Desanding / descaling applications.

GH STEEL GRIT

This is product is untampered, has highest hardness >60 HRC. Recommended to use only in Air Blasting Machines or Stone Cutting applications. Product shape always use to be angular. During operation particles break & form smaller size with angular only. This product is particularly effective in surface treatment and produce a uniform, etched finish.

Gallery

Sreen No 7 8 10 12 14 16 18 20 25 30 35 40 45 50 80
Screen No
2.80
2.36
2.00
1.70
1.40
1.18
1.00
0.85
0.71
0.60
0.50
0.42
0.35
0.30
0.18
G12
TP
12 Max
G14
TP
10 MAX
G16
TP
10 MAX
80 MIN
90 MIN
G25
TP
40 MAX
85 MIN
97 MIN
G40
TP
20 MAX
85 MIN
97 MIN
G50
TP
10 MAX
80 MIN
90 MIN
G80
TP
20 MAX
75MAX
G120
TP
10 MAX

Chemical Composition

Elements Specification
Carbon
0.8-1.2%
Silicon
0.4-1.2%
Managnese
0.6-1.2%
Sulphur
0.05%Max
Phosphorous
0.05% Max

This will close in 0 seconds

This will close in 0 seconds

This will close in 0 seconds